Velux KLF 100 Manual Del Usuario página 33

Use of one entry
The functions
same entry. Each time the entry is activated, the function
will change.
For instance, ordinary electric light in buildings is con-
trolled from a wall switch that turns the light both on and
off. By choosing "Toggle signal", the interface/repeater
unit is set to change between
-> STOP ->
-> STOP ->
trolled by connecting C and
1
Press to highlight "Toggle signal".
Press "Enter" to confirm your choice.
2
The display shows that the signal mode has been saved.
Note: The products will travel in the reverse direction to
the latest activation, no matter the control device. The
products will always travel to maximum top or bottom
position.
/ / STOP are controlled by one and the
-> STOP ->
etc each time the entry is activated.
-> STOP -> -> STOP ->
:
ENGLISH
-> STOP ->
etc is con-
C
A B C D E F G H
SIGnAl MODE
Separate signals
Toggle signal
Enter Back
InFORMATIOn
Signal mode
saved
Back
VELUX 33