Velux KLF 100 Manual Del Usuario página 27

5
The display shows the list of all registered products once
again. The chosen product has been ticked.
6
Repeat items 3-6 to edit additional products if required.
When the products to be edited have been ticked, the list
must be saved.
Press "Edit".
7
Press to highlight "Save list".
Press "Enter" to confirm your choice.
8
The display shows that the list has been saved.
Note: The individual products can be identified by
highlighting "Identify products". Highlight "Undo list" to
undo your choice.
When items 1-8 have been executed and the list with
products has been saved, the interface/repeater unit is
ready for use. The interface/repeater unit is activated by
pressing "Back" for more than 3 seconds or by waiting
2 minutes. After this, the display shows that the interface/
repeater unit is active.
ENGLISH
ROOM 1
WInDOW
No. 1
No. 2
No. 3
Edit Back
ROOM 1
WInDOW
No. 1
No. 2
No. 3
Edit Back
CREATE lIST
Select product
Identify product
Save list
Enter Back
InFORMATIOn
list saved
SElECT PRODuCTS
Create list
Undo list
Identify products
Enter Back
InFORMATIOn
Interface
active
VELUX 27