General Safety Rules - Makita 6723DW Manual De Instrucciones

Atornillador a batería en línea recta
Ocultar thumbs Ver también para 6723DW:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

(FOR ALL BATTERY OPERATED TOOLS)
WARNING! Read and understand all instructions.
may result in electric shock, fire and/or serious personal injury.
Work Area:
1. Keep your work area clean and well lit.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
can cause you to lose control.
Electrical Safety
4. A battery operated tool with integral batteries or a separate battery pack must be
recharged only with the specified charger for the battery.
one type of battery may create a risk of fire when used with another battery.
5. Use battery operated tool only with specifically designated battery pack.
other batteries may create a risk of fire.
Personal Safety
6. Stay alert, watch what you are doing, and use common sense when operating a power
tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools may result in serious personal injury.
7. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your
hair, clothing, and gloves away from moving parts.
be caught in moving parts.
8. Avoid accidental starting. Be sure switch is in the locked or off position before
inserting battery pack.
into a tool with the switch on invites accidents.
9. Remove adjusting keys or wrenches before turning the tool on.
left attached to a rotating part of the tool may result in personal injury.
10. Do not overreach. Keep proper footing and balance at all times.
balance enable better control of the tool in unexpected situations.
11. Use safety equipment. Always wear eye protection.
hat, or hearing protection must be used for appropriate conditions.
Tool Use and Care
12. Use clamps or other practical way to secure and support the workpiece to a stable
platform.
Holding the work by hand or against your body is unstable and may lead to loss of
control.
13. Do not force tool. Use the correct tool for your application.
better and safer at the rate for which it is designed.
14. Do not use tool if switch does not turn it on or off.
switch is dangerous and must be repaired.
15. Disconnect battery pack from tool or place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool.
preventive safety measures reduce the risk of starting the tool accidentally.
4

GENERAL SAFETY RULES

SAVE THESE INSTRUCTIONS.
Power tools create sparks which may ignite the dust or
Carrying tools with your finger on the switch or inserting the battery pack
Failure to follow all instructions listed below,
Cluttered benches and dark areas invite accidents.
A charger that may be suitable for
Loose clothes, jewelry, or long hair can
Dust mask, non-skid safety shoes, hard
A tool that cannot be controlled with the
Distractions
Use of any
A wrench or a key that is
Proper footing and
The correct tool will do the job
USA003-2
Such

Publicidad

Tabla de contenido
loading

Tabla de contenido