Battery Packs/Batteries - Bosch GIS 1000 C Professional Manual Original

Transport
The usable lithium-ion battery packs are subject to the Dan-
gerous Goods Legislation requirements. The user can trans-
port the battery packs by road without further requirements.
When being transported by third parties (e.g. via air transport
or forwarding agency), special requirements on packaging
and labelling must be observed. For preparation of the item
being shipped, consulting an expert for hazardous material is
required.
Dispatch battery packs only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery pack
in such a manner that it cannot move around in the packaging.
Please also observe possibly more detailed national regula-
tions.
Disposal
Measuring tools, battery packs/batteries, accesso-
ries and packaging should be sorted for environmen-
tal-friendly recycling.
Do not dispose of measuring tools and batteries/rechargea-
ble batteries into household waste!
Only for EC countries:
According to the European Guideline
2012/19/EU, measuring tools that are no
longer usable, and according to the Europe-
an Guideline 2006/66/EC, defective or used
battery packs/batteries, must be collected
separately and disposed of in an environ-
mentally correct manner.
Batteries no longer suitable for use can be directly returned
at:
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Bosch Power Tools

Battery packs/batteries:

Li-ion:
Please observe the instructions in sec-
tion "Transport", page 33.
Integrated batteries may only be removed for disposal by
qualified personnel. Opening the housing shell can destroy
the measuring tool.
To remove the lithium-ion backup battery from the measuring
tool, first remove the battery pack 30 or the battery adapter.
Remove the protective glass of the display and then the key-
pad.
Subject to change without notice.
English | 33
As shown in the illustration, re-
move the U-shaped clips holding
the housing shells together.
Unscrew the screws on the hous-
ing and take off the housing shell
with the type plate.
The backup battery (button cell)
is located on the circuit board in-
side the housing. Slide it out of its
holder and dispose of it in an envi-
ronmentally correct manner.
1 609 92A 0XP | (17/4/15)