Putting Into Operation; Service And Maintenance - Festool BG-RG 150 Manual De Instrucciones

7

Putting into operation

WARNING
Risk of accident if the machine is operated us-
ing unauthorised voltages or frequencies.
 The mains voltage and the frequency of the
power source must correspond with the
specifi cations on the machine's name plate.
 In North America, only Festool machines with
the voltage specifi cations 120 V/60 Hz may
be used.
WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 Observe the maximum appliance socket
connected load (see chapter "Technical data")
1. Insert the fl exible power cord of the fl oor guide
[1-8] into the power socket on the vacuum
cleaner.
2. Turn on the miller switch [1-9], lock in.
3. Connect the fl exible power cord of the vacuum
cleaner to the electrical power grid.
4. Hold down the frame with the handles [1-6]
and step on the latch [1-10]. The frame with
the handles is now free to move.
After finishing work: tip the frame of the floor
guide forwards and engage in rest position.
8 Environment
Do not throw the power tool in your household
waste! Dispose of the machine, accessories and
packaging at an environmentally-responsible re-
cycling centre! Observe the valid national regula-
tions.
EU only: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh:
www.festool.com/reach
6
9

Service and maintenance

WARNING
Risk of accident, electric shock
 Always pull the plug out of the socket before
performing any type of work on the machine.
 All maintenance and repair work which re-
quires the motor housing to be opened, must
only be carried out by an authorised service
workshop.
Customer service and repair. Only through
manufacturer or service workshops:
Please fi nd the nearest address at: www.
festool.com/Service
Use only original Festool spare parts! Or-
EKAT
4
der No. at: www.festool.com/Service
5
3
2
1
9 EU Declaration of Conformity
Floor Guide
BG-RG 150
Year of CE mark: 2013
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
2004/108/EC, 2006/42/EC, 2011/65/EU, EN ISO
12 100, EN 60 745-1, EN 55 014-1, EN 55 014-2.
Festool Group GmbH & Co. KG
Wertstr. 20, D-73240 Wendlingen, Germany
Dr. Martin Zimmer
Head of Research, Development and Technical
Documentation
2013-06-01
Serial no.
768 717