Roadstar HIF-1899TUMPK Manual De Instrucciones página 7

Ocultar thumbs Ver también para HIF-1899TUMPK:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
REPEAT/RANDOM MODE
Press the REPEAT button from Remote Control or PLAY MODE from main unit to ac-
tivate this function. All the tracks can be played in difference mode as follow:
Repeat play: you can listen the desired tracks or folder repeatedly by this function.
Random play: you can listen all the tracks or folder in a random order by this func-
tion
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for mp3 (20 in CD) and play in any order. before
use, be sure the system is at stop mode before programming:
1. Press cd/usb mode & stop the cd playback.
2. Press the "PLAY MODE" button, " P " will appear on lcd display (18). Moreover, it
will indicate program no. and digits for track no. to be programmed.
3. Select a desired track by pressing skip or buttons (3).
4. Press the " PLAY MODE " button to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press cd " play/pause (2) to
play the disc in assigned order.
7. To cancel the programmed file, press "stop" button.
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored in the me-
mory media with usb connecting port.
1. Set function selector (15) at cd/usb mode and then press FUNCTION button (6) to
select usb.
2. Plug-in the usb plug with the face up & make sure it going into completely.
3. The system will start reading the storage media automatically after connecting,
and lcd display (18) will show the total number of mp3/wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as above.
REMARKS:
The system can detect and read the file under mp3 and wma format only though the
usb port.
If connect the system to mp3 player via the usb socket, due to variances in mp3 en-
coding format, some mp3 player may not be able to play via the usb socket. this is
not a maul-function of the system.
Connecting the usb upside down or backwards could damage the audio system or
the storage media (usb thumb drive). Check to be sure the direction is correct befo-
re connection.
LISTENING TO TAPE
1. Set the Function button (6) to " TAPE " mode. The system will start playback auto-
matically after inserting the cassette tape.
2. Press " TAPE FORWARD / EJECT " Button (33) half inwards during playback mo-
de. The tape will wind forward.
3. Slightly press the " TAPE FORWARD / EJECT " Button (33) again to resume play-
English
4

Publicidad

Tabla de contenido
loading

Tabla de contenido