Safety And Installation Instructions - Dometic Heki 2 de Luxe Instrucciones De Montaje

Ocultar thumbs Ver también para Heki 2 de Luxe:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

Safety and installation instructions

2
Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the
vehicle manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:
• Damage to the product resulting from mechanical influences and excess voltage
• Alterations to the product without express permission from the manufacturer
• Use for purposes other than those described in the operating manual
!
WARNING! Beware of injury
Do not exceed the maximum allowable driving speed of 130 km/h,
because this can damage the roof light. Parts that come loose may injure
people in the vicinity.
I
NOTE
If you do not have sufficient technical knowledge for installing the
components in vehicles, you should have a specialist install the roof
window in your vehicle.
Please note the following:
• If faults or disturbances occur, consult a specialist workshop immediately.
• Risk of breakage! Do not tread on the glass dome.
• Before starting your journey, check that the roof window is locked properly.
• Before starting your journey, check the roof window for damage (such as tension
cracks in the acrylic glass).
• Do not open the roof window while driving.
• Do not open the window in strong wind or rain.
• Close the roof window if it rains or snows.
• Do not leave the vehicle with the roof window open.
• Keep the roof window free of snow and ice.
• The electrical connections should only be performed by an electrician.
• Replace the defective lights using ones of the same type and which have the
same technical data (12 V, 5 W).
4
Heki2 de Luxe
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Heki 2

Tabla de contenido