Joie i-Venture Manual De Instrucciones página 8

!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points. -1
9
!
The load leg must be installed
correctly with green indicator.
To remove the base from the
vehicle, press and release the
connectors from the vehicle's
ISOFIX. -1 & -2
10 10
To prevent damage during transit,
press the ISOFIX releasing button
-1 and fold the connector
11
completely. -2
11
13
9
-2
9
1
10
2 1
11
2
Installing the i-Venture seat
into the i-base Advance
see images
Rear Facing Mode
2
Rearward Facing Child height 40cm-105cm/Child weight 18.5kg
Recline position
!
Please install i-Venture and the base on the rear vehicle seat, then
place the child in i-Venture seat.
!
Ensure the rebound bar is installed onto the base.
!
The easiest to install i-Venture seat to the base is when the base is in
the 7th recline position.
!
Pull up on the i-Venture seat to
make sure it is securely latched
onto the base.
!
Make sure that there is no gap
between the base and vehicle seat.
1
-
12 27
Position 1-7
12
14