dirna Bergstrom bycool green line compact Instrucciones De Montaje página 18

COMPACT
EN
Assembly
Recommendations
• Before starting
instructions and follow them during installation
process.
• Use the adequate tools for each operation.
Electricity
• Disconnect ignition key.
• Disconnect battery before starting assembly.
• Make sure electric components are securely
connected, checking their correct fitting.
! Warning
If the unit slants during assembly, wait for at
least 60 minutes with the unit in horizontal
position before starting it up.
! Warning
When installing air conditioning equipment on roof,
the upper cabin part must be protected with a cloth
or a protective blanket to avoid possible scratches.
When installing Compact on roof, take into account
that, normally, cabins equipped with a hatch have a
strong enough structure to hold equipment weight.
However, if it is not the case and it is necessary to
carry out a cut in the roof or, although it has a hatch,
the material is not resistant enough (if roof is made
of fibre, plastic, etc...), it is the installer who will have
to decide, under his responsibility, if it is necessary
to reinforce the roof to avoid possible deformations,
breaks, water entries, etc., habilitating the means
required to stop it from occurring.
With DAF XF 105 high, plastic roof cabins, take
special care and only rest on cabin nerves to avoid
fibre part from sinking.
assembly, please
Torx wrenches set
Allen wrenches set
read
Open-jawed spanner 10, 13, 14
Scissors
Flexo-meter
Mounting instructions
User's guide
Troubleshooting
Warranty
Fragile
Beware of cuts!
Electrical hazard
!
Use torques according to DAF specifications.
!
The installing personnel must have a sufficient
training in vehicles air conditioning.
!
dirna Bergstrom, s.l. shall not be responsible for
breakdowns or damages coming from an inadequate
handling or installation of the equipment or from
modifications and substitutions carried out without
our express and written authorisation.
!
Equipment pre-charged with refrigerating gas.
(Do not handle refrigerating gas circuit).
!
Please see product warranty procedure included
in Troubleshooting.
!
Please see equipment User's Guide for its correct
functioning of the remote control and control panel.
!
Once installation is finished, the following documents
must be handed over to the user: User's Guide,
Warranty and Troubleshooting.
18
Air conditioning for vehicles
Tools
Documentation included
Symbology
!
Warnings
220.AA6.1001
220.AA6.1002
220.AA6.1003
220.AA1.0017