Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH (Original instructions)
Controls (Fig. 1-5)
1.
Flash light button
2.
Flash light
3.
FM Antenna
4.
Speaker
5.
Radio power button
LCD display (Fig. 6)
A.
AM icon
B.
FM icon
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
............... Read instruction manual.
............... Always recycle batteries
Li-ion
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using Makita LXRM01, basic precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
GENERAL SAFETY RULES
1. Before using Makita LXRM01, read all instructions and
cautionary markings.
2. Clean only with dry cloth.
3. Do not block any ventilation opening. Install in
accordance with the manufacturer's instruction.
4. Do not install near any heat sources such as radiators,
heat register, stoves, or other apparatus (including
amplifiers) that produce heat.
5. Only use attachments/accessories specified by the
manufacturer.
6. Avoid using this unit in metal dust surrounding, as it
will affect the quality of the speaker.
7. Do not soak the unit into water. It can only tolerate in
the environment under 90% of humidity.
8. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
9. Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
10. When (the) battery pack is not in use, keep it away
from other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or fire.
Makita LXRM01 Overview
6.
Preset buttons
7.
Radio station tuning Up/Down
button
8.
Volume Up/Down button
9.
LCD display
C. Preset numbers
D. Volume level
11. Under abusive conditions, liquid may be ejected from
SPECIFIC SAFETY RULES
SAVE THESE INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instructions
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter, stop
4. If electrolyte gets into your eyes, rinse them out with
5. Do not short the battery cartridge:
6. Do not store the tool and battery cartridge in locations
7. Do not incinerate the battery cartridge even if it is
8. Be careful not to drop or strike battery.
9. Do not use dropped or struck battery. (Do not use a
SAVE THESE INSTRUCTIONS
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
10. Main battery compartment
11. Red indicator
12. Button
13. Battery cartridge
E.
Battery indicator
F.
Radio station frequency
the battery; avoid contact. If contact accidentally
occurs, flush with water.
If liquid contacts eyes, additionally seek for medical
help. Liquid ejected from the battery may cause
irritation or burns.
and cautionary markings on (1) battery charger,
(2) battery, and (3) product using battery.
operating immediately. It may result in a risk of
overheating, possible burns and even an explosion.
clear water and seek medical attention right away. It
may result in loss of your eyesight.
(1)
Do not touch the terminals with any conductive
material.
(2)
Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3)
Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
where the temperature may reach or exceed 50°C
(122°F).
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
damaged battery.)
discharged. Always stop tool operation and charge the
battery cartridge when you notice less tool power.
3
Publicidad
Tabla de contenido
