Important Safety Instructions - Makita ML106 Manual De Instrucciones

ENGLISH (Original instructions)
1. Battery cartridge
2. Red indicator
3. Battery release button
4. Indicator lamps
SPECIFICATIONS
Major Features
Voltage
LED
Operating time
(approximately)
Dimensions
Net Weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Operating time may differ depending on battery type and usage condition.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
WARNING:
Only use the battery cartridges listed above. Use of any other battery cartridges and chargers may cause injury and/or
fire.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, and personal injury, including the following:
READ ALL INSTRUCTIONS.
1. Before using battery cartridge, read all instructions
and cautionary markings on (1) battery charger, (2)
battery, and (3) product using battery.
2. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
3. Use a power source with the voltage specified on the
nameplate of the charger.
4. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
5. After charging or before attempting any maintenance
or cleaning, unplug the charger from the power
source.
6. This battery holder part is not waterproof. Do not use it
in damp or wet locations. Do not expose it to rain or
snow. Do not wash it in water.
7. Do not touch the inside of the flashlight head with
tweezers, metal tools, etc.
4
Explanation of general view
5. Check button
6. Switch
7. Lens guard
8. Zoom ring
Model
BL1016 battery
BL1021B battery
BL1041B battery
with BL1041B battery
DC 10.8 V - 12V max
4.9 W x 1 pc
L 290 mm (11-3/8") x W 66 mm (2-5/8") x H 93 mm (3-5/8")
0.61 - 0.78 kg (1.3 - 1.7 lbs)
8. Under abusive conditions, liquid may be ejected from
the battery, avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
9. Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
10. Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion
11. Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increase the risk of fire.
12. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container with
other metal objects such as nails, coins, etc.
(3) Do not expose battery cartridge to water or rain.
A battery short can cause a large current flow,
overheating, possible burns and even a breakdown.
13. If electrolyte gets into your eyes, rinse them out with
clear water and seek medical attention right away. It
may result in loss of your eyesight.
14. Be careful not to drop or strike battery.
9. Strap hook
10. Ring
11. Hole
ML106
5.0 hours
6.0 hours
12 hours