Adjusting The Air Flow Direction; Plasmacluster Operation - Sharp AY-XPC07PU Manual De Instrucciones

ADJUSTING THE AIR FLOW
DIRECTION
VERTICAL AIR FLOW DIRECTION
1 Press the SWING button (
• The vertical airfl ow louver will swing.
2 Press the SWING button (
to stop at the desired position.
CAUTION:
Never attempt to adjust the louvers manually.
• Manual adjustment of the louvers can cause
the unit to malfunction.
• When the vertical adjustment louver is posi-
tioned at the lowest position in the COOL or
DRY mode for an extended period of time,
condensation may result.
NOTE:
• The adjustment range is narrower than the
SWING range in order to prevent condensa-
tion from dripping.
HORIZONTAL AIR FLOW DIRECTION
Hold the horizontal airfl ow louver link
and adjust the air fl ow direction.
Louver link
(AY-XPC07PU, AY-XPC09PU,
AY-XPC12PU)
OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-9 OM_AY-XPC5PU(A760)_EN-FR-ES.indb EN-9

PLASMACLUSTER OPERATION

The Plasmacluster ion generator inside
the air conditioner will release positive and
). negative Plasmacluster ions into the room
to reduce airborne mold.
1 During operation, press the PLAS-
) again
MACLUSTER button.
• The remote control will display "
• The blue PLASMACLUSTER lamp will
1
2
TO CANCEL
Press the PLASMACLUSTER button again.
• The blue PLASMACLUSTER lamp will turn off.
NOTE:
• Use of the PLASMACLUSTER operation will
be memorized, and it will be activated the next
time you turn on the unit.
• To perform Plasmacluster operation in FAN
Louver link only mode, press the PLASMACLUSTER but-
ton when the unit is not operating.
The mode symbol of the remote control will go
off and the fan speed cannot be set to AUTO.
• Plasmacluster is Sharp's original technology.
For more information, please visit:
http://www.sharp-pci.com/en/
EN-9
light up.
".
1
10/19/12 5:42:31 PM 10/19/12 5:42:31 PM