Markers; Tv Operating Mode - Promax PRODIG-5 Manual Del Usuario

USER'S MANUAL. PRODIG-5
If there is an excess of sound carrier, tearing or 'moiré' may appear on the screen
due to the frequency beats between the sound, chrominance and the picture
frequencies.
If there is a chrominance carrier defect, then the television colour amplifier must
function at maximum gain, which could result in noise appearing all over the television
screen with points of colour that disappear when the saturation control is reduced; in an
extreme case, loss of colour may occur.

5.15.1 Markers

(Only in Spectrum Analyser mode). The marker in red colour indicates the central
frequency or tuning frequency, which can be moved by means of turning the rotary
selector [1] as well in channel as in frequency tuning mode
When monitoring a digital signal spectrum also appears two additional markers in
white colour, which indicate the bandwidth of the digital channel (See previous Figure).
5.16

TV Operating Mode

When pressing the
accedes to the TV mode, and tries to demodules on the monitor the
(EXPLORER)
currently tuned video signal.
In the monitor will appear the TV picture with a window on the lower part to show,
for five seconds, in the case that the signal is analogue, the channel number, the
frequency, the active canalization, the colour system and the TV standard.
CHANNEL:
CCIR
DVB-T
VISTA TV
NETW.: VistaNetw
VIDEO:
AUDIO:
11/2013
[2] key from any mode of operation the PRODIG-5
OSD: ON
66
834.00 MHz
3999 kbit/s MPEG-2
192 kbit/s MPEG-1 L-2
Figure 36.- Digital channel monitoring.
[24].
DTV
(FREE)
VPID: 101
APID: 103
MP@ML
720x576i
4:3 50 Hz
Component
SID: 100
NID: 12289
- -
Page 61