Antenna Alignment Function - Promax PRODIG-5 Manual Del Usuario

USER'S MANUAL. PRODIG-5
When a digital channel is decodified, once the Table of Services SDT (Service
Description Table) acquisition is completed, is possible to accede to the list of
services contained in the Table.
For it place the field selector, by means of the vertical cursors
field of the active service (e.g. Veo TV in the following figure) and later press the rotary
selector [1].
The DIGITAL SERVICES menu will appear then with the services available in the
digital Multiplex. Move the vertical cursors
press it to select the service to visualise on screen.
CHANNEL:
CCIR
DVB-T
VISTA TV
NETW.: VistaNetw
VIDEO:
AUDIO:
Figure 38.- Digital channel monitoring. Digital services.
Also is possible to change the active service directly acting through the horizontal
cursors [6] once has selected the field of the service from information window of
the currently tuned channel.
5.17

Antenna Alignment Function

It allows executing the function Antenna Alignment to align antennas using a
faster sweep without display of numerical measures. The display appears divided in two
parts, the left one shows the spectrum of the signals detected in the band and on the
right two analogue bars represents the level of signal corresponding to the tuned
frequency or channel. The left bar shows the peak value with a certain persistence. The
right bar shows a filtered average value.
11/2013
DIGITAL SERVICES
24H TVE-RTVE
CLAN/50 TVE-R
RTVE 1-RTVE
RNEC-RTVE
OSD: ON
VISTA TV
66
TVE 1-RTVE
834.00 TVE 2-RTVE MHz
(*)Canal Ingenier
EXIT
3999 kbit/s MPEG-2
192 kbit/s MPEG-1 L-2
[6] or turn the rotary selector [1] and
DTV
(FREE)
VPID: 101
APID: 103
MP@ML
720x576i
4:3 50 Hz
Component
SID: 100
NID: 12289
- -
[6], on the
Page 63