Using The Product; Cleaning And Maintenance - Dometic FP 200 Instrucciones De Montaje

Using the product

I
NOTE
fig. 0, page 6: The tension of the cords (3) depends on which groove
(1 or 2) the cords are hung in.
Use groove 2 if the cords are to have higher tension.
5 Using the product
Closing the blind (fig. a, page 7)
➤ Pull the blind with both hands up to the desired position.
The two cords in the guide rails keep the blind in the desired position.
Opening the blind
➤ Guide the blind back into its holder slowly using both hands.
6

Cleaning and maintenance

A
NOTICE! Damage hazard
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
➤ Spray the sliding surfaces of the guide rails periodically with small amounts of
silicone spray to achieve the smoothest possible sliding of the handle strips in the
guide rails.
➤ To prevent material fatigue, do not keep the blind closed for an extended period
of time.
10
FP200
EN