Scope Of Delivery - Dometic MS 880 Instrucciones De Montaje

Scope of delivery

A
NOTICE!
• To prevent damage when drilling, make sure there is sufficient space
on the other side for the drill head to come out.
• Deburr all drill holes and treat them with a rust-protection agent.
Observe the following instructions when working with electrical parts:
A
NOTICE!
• When testing the voltage in electrical cables, only use a diode test
lamp or a voltmeter.
Test lamps with an illuminant take up voltages which are too high and
which can damage the vehicle's electronic system.
• When making electrical connections, ensure that:
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp edged ducts without protection.
• Insulate all connections.
• Secure the cables against mechanical wear with cable binders or insu-
lating tape, for example to existing cables.
Please observe the following instructions in particular:
• Observe the applicable legal regulations.
• When driving, make sure no other road users can be injured.
• MagicSpeed is designed as an additional aid; i. e., it does not relieve you of the
duty of taking due care when driving.
3 Scope of delivery
No. in
fig. 4,
Quantity
page 4
1
2
3
4
12
Designation
1 Electronic module
1 Cable set
1 Clutch switch
1 Fastening plate
MS880
EN