Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GLL 2-50 Professional Manual Original

OBJ_BUCH-817-007.book Page 17 Monday, July 4, 2016 6:35 PM
tical laser line runs centrally through the alignment aid 15.
Then, align the alignment plate with the alignment aids 13 or
14 with regard to the reference line.
For cross line or in vertical operation, the vertical laser line on
the floor indicates a 45° angle to the reference line. Align the
flooring plates with regard to this line.
Projecting Plumb Points to the Ceiling (see figure K)
Draw two lines crossed at a right angle through the point that
you want to project to the ceiling. Place the alignment plate
12 onto the crossed lines and align it with the alignment aids
13 and 14 on the cross.
Position the measuring tool via the tripod mount 6 onto the pin
16 of the alignment plate. Position it in such a manner on one of
the two outer protrusions on the alignment plate that the verti-
cal laser line runs centrally through the corresponding align-
ment aid 13 or 14. Select vertical operation and draw the cen-
tre of the line running across the measuring tool to the ceiling.
Turn the measuring tool on the alignment plate by 90°. Pay
attention not to move the position of the alignment plate.
After levelling in, draw the cross point of the vertical laser line
to the already drawn line. The cross point of both lines is the
projected plumb point.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the protective
pouch 17 or in the case 18.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Regularly clean the surfaces at the exit opening of the laser in
particular, and pay attention to any fluff or fibres.
For repairs, only send in the measuring tool in the protective
pouch 17 or in the case 18.
Accessories
Protective Pouch 17 . . . . . . . . . . . . . . . . . . . 1 609 203 X77
Case 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 605 438 682
Laser Viewing Glasses 19 . . . . . . . . . . . . . . . 2 607 990 031
Measuring plate with foot 20. . . . . . . . . . . . . 2 607 002 195
Laser Receiver 21 . . . . . . . . . . . . . . . . . . . . . 0 601 069 100
Construction tripod BS 150 . . . . . . . . . . . . . 0 601 096 B00
Universal holder BM 1 . . . . . . . . . . . . . . . . . . 0 601 015 A00
Telescopic rod BT 350. . . . . . . . . . . . . . . . . . 0 601 015 B00

After-sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Bosch Power Tools
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
English | 17
1 609 92A 27R | (4.7.16)