Hd Radio Control Features (Ez700Sr) - Kenwood Ez900HDS Manual De Instrucciones

Function of the Ez700SR
HD Radio control features
AUTO/AME
NOTE
With the HD Radio tuner, you can use the similar
functions to <Tuning Mode>, <Station Preset
Memory>, <Auto Memory Entry>, and <Preset
Tuning> of Tuner features. Refer to Tuner features
(page 15,16) for how to use the functions.
Tuning
Selecting the station.
1
Select HD Radio source
Press the [SRC] button.
Select the "HD Radio" display.
2
Select the band
Press the [FM] button.
Each time the [FM] button is pressed it switches
between the HF1, HF2, and HF3 bands.
When the [AM] button is pressed, it switches
HA band.
OPEN
ST indicator
ST ST
ATT ATT
Band display
SRC AM FM
1 - 6
TI TI DAB NEWS DAB NEWS MP3 WMA MP3 WMA
DIGITAL ANALOG RDS PTY DIGITAL ANALOG RDS PTY
Frequency display
3
Tune up or down band
Turn the [4] / [¢] knob.
• When you connect an HD Radio, Tuner features of
the unit are disabled and switched to HD Radio tuner
features. A portion of the setting methods including
the Tuning Mode will change.
• During reception of stereo stations the "ST" indicator
is ON.
• The setting of the CRSC is always ON. Switching to
OFF is not possible.
• Using <Receive mode Setting> (page 30) the modes
can be switched to digital broadcast automatic
switching, analog broadcast only, or digital broadcast
only.
• When "Digital" has been set with <Receive mode
Setting> (page 30), the seek time will be longer to
allow a check of whether the transmission is a digital
broadcast.
4/ ¢
c.s.
Preset station number
M P S M P S
English
17
|