Sirius Id (Esn) Display; Sirius Channel Skip/ Lock Setting - Kenwood Ez900HDS Manual De Instrucciones

In SIRIUS source

SIRIUS ID (ESN) display

Displaying the SIRIUS ID (Electronic Serial
Number) display.
Display
"ESN = ************"
• Serial & SIRIUS ID (ESN)
It is especially important to retain the unit serial
number and the electronic SIRIUS Identification
number for service activation and potential future
service changes.
In SIRIUS source

SIRIUS Channel Skip/ Lock Setting

You can Skip and Lock unwanted channels while
tuning and prohibit access to the particular
channels. (Channel Lock function without channel
number 184)
1
Select Channel Skip/ Lock mode
Press the [AUDIO] button.
Select the "Skip/ Lock" display.
• This function can be used the [FM] / [AM] button.
2
Enter Channel Skip/ Lock mode
Press the [MENU] button.
"CH- *** - - " is displayed.
3
Select the channels
Turn the [4] / [¢] knob.
4
Set the item (Channel Skip or Lock)
For Channel Skip:
Press the [AUDIO] knob.
When it's ON, "CH- *** S - " is displayed.
Each time the [AUDIO] knob is pressed, the
Channel Skip switches ON or OFF.
For Channel Lock:
Press the [AUDIO] knob for at least 1 second.
When it's ON, "CH- *** S L " is displayed.
• Channel Skip is automatically set in the unit when you
set the Channel Lock function.
5
Exit Channel Skip/ Lock mode
Press the [MENU] button.
Canceling the Channel Lock mode
1
Select Channel Skip/ Lock mode
Press the [AUDIO] button.
Select the "Skip/ Lock" display.
• This function can be used the [FM] / [AM] button.
2
Enter Channel Skip/ Lock mode
Press the [MENU] button.
"CH- *** - - " is displayed.
3
Select the channels
Turn the [4] / [¢] knob.
4
Cancel for Lock mode
Press the [AUDIO] knob for at least 1 second.
"CODE ----" is displayed.
5
Select the digits to enter
Press the [AUDIO] knob.
• This function can be used the [FM] / [AM] button.
6
Select the Lock Code numbers
Turn the [4] / [¢] knob.
7
Repeat steps 5 and 6, and complete the Lock
Code.
8
Confirm the Lock Code
Press the [AUDIO] knob for at least 1 second.
"APPROVED" is displayed.
9
Exit Channel Skip/ Lock mode
Press the [MENU] button.
| 31
English