Mounting On The Wall - Perel CSOL06 Manual Del Usuario

Switch off the device [1] before (re)placing batteries.
1.
Loosen the screws at the back of the device [2] and remove the
2.
covers.
Place a new battery of the correct size and type in the device.
3.
Respect the polarity!
Replace the covers and fix them by tightening the screws.
4.

5.3 Mounting on the Wall

Fix a screw into the wall and let it protrude at least 5 mm. Hang the
lamp unit on the screw [3].
6. Cleaning and Maintenance
Keep the solar panel [4] clean to optimise performance.
It is recommended to change the battery once per year.
7. Technical Specifications
solar panel ........................................... 4 V / 82.5 mA
light source
lower, main part ...................... 0.5 W – 12000 mcd
front and side strips .................. 0.07 W – 2000 mcd
light colour ....................................................... white
rechargeable battery ........ 1x 3.2 V (LiFePo4), 500 mAh
operating time ...................... 6~8 h when fully charged
dimensions .................................... 78 x 170 x 50 mm
weight ......................................................... ± 230 g
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 02 – 14/06/2016
CSOL06
5 ©Velleman nv