F15
6.3
Connecting to the cigarette lighter
I
NOTE
If you connect the cooler to the cigarette lighter, remember that
the ignition must be turned on to supply it with power.
7
Cleaning and maintenance
!
WARNING!
Always disconnect the device from the mains before you clean
and service it.
A
NOTICE! Risk of damage
Never clean the cooler under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during
cleaning as these can damage the cooler.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any
dust and dirt, so that heat can be released and the device is not damaged.
EN
Cleaning and maintenance
11