Manual Preset Tuning - Yamaha RX-497 Manual De Instrucciones

FM/AM TUNING

Manual preset tuning

You can also manually store up to 40 stations (8 stations in
each of the 5 groups, A1 to E8). You can then easily recall
any preset stations by selecting the preset station numbers
where they are stored.
ZONE 2 ON/OFF
ZONE CONTROL
MASTER
A/B/C/D/E 1 2
ON OFF
INPUT BASS
MAIN ZONE
PHONES SPEAKERS 1
A B 2
ON/OFF 3
4
– 5
3
1
Repeat steps 1 to 4 in "Automatic tuning" or
in "Manual tuning" to tune into a station.
When you tune into a station, the frequency of the
received station is shown in the front panel display.
2
Press MEMORY on the front panel.
The MEMORY indicator flashes in the front panel
display for approximately 5 seconds.
MEMORY
MAN'L/AUTO FM
3
Press A/B/C/D/E on the front panel
repeatedly to select a preset station group (A
to E).
The selected preset station group is shown in the front
panel display.
24
2
l TUNINGH h
FM/AM
PURE DIRECT
EDIT MEMORY TUNING MODE
MAN'L/AUTO FM AUTO/MAN'L
20 20
3 4 5 6 7 8 VOLUME
26 26
TREBLE BALANCE LOUDNESS
0 0 0 FLAT 40 40
1 1 1 1 1 1
–30dB
2 2 2 2 2 2 10
3 3 3 3 3 3 9 60 60
4 4 4 4 4 4 8 ∞
5 + – 5 5 + L 5 5 R 5 7
6
4
MEMORY
Flashes
A/B/C/D/E
4
Press one of the preset station number
buttons on the front panel to select a preset
station number (1 to 8) where you want to
store the station.
1
MD/TAPE MONITOR
Note
16 16
12 12
8
This operation must be done within 5 seconds while the
4
MEMORY indicator is flashing in the front panel display.
2
0
-dB -dB
Otherwise, the manual preset tuning process is automatically
canceled.
5
Press MEMORY on the front panel to store
the station.
6
Repeat steps 1 to 5 to store other stations.
Notes
• Any station data stored under a preset station number is cleared
when you store a new station under that preset station number.
• The reception mode (stereo or monaural) is stored along with
the station frequency.
2 3 4 5 6 7 8