Personalizing The Daily Program - Gewiss Chorus GW 10 841 Manual Del Usuario

OPERATING INSTRUCTIONS
twice to personalize the preset daily program or to make a modification. .
Press key

Personalizing the daily program

The PROG symbol appears on the display while the bar
for the first day of the week will start to blink.
Select the first day required with keys
Press key
selection.
After confirmation of the first day, the current profile,
relative to the day selected is displayed on the display.
The hour starts to blink.
Select the temperature set point that it is required to set
starting from hour 00:00 using keys
The symbols
to the selected set point appear on the display.
The set point is applied to the hourly profile until the
first variation present in the current program.
Increase the time with keys
when it is required to modify the proposed profile; during
the increase the column relative to the selected time
blinks on the hourly profile.
Select the new set point with keys
applied until the next variation present in the program.
within 30 seconds to confirm the
, or and the value corresponding
41
.
.
until the moment
, which will be
E E
N N
G G
L L
I I
S S
H H