See the operating instructions for your router.
The speaker (A) establishes a network connection. The blue LED flashes 3 times fast, followed by a
short pause.
After the connection has been established, the blue LED goes on.
Now the speaker (A) can play audio signals from the network.
The speaker (A) will save the connection data, so the next time you switch it on you don't
need to re-establish the connection again.
Establishing the Wi-Fi connection via the "UNDOK" app
If you cannot establish the connection using WPS, you can use the "UNDOK" app to connect the
speaker to the network.
Power on the speaker and start the AP mode.
When using it for the first time, the speaker starts the AP mode automatically.
Otherwise hold the WPS / RESET button (7) for approx. 5 seconds to restart the
speaker. After a brief initialisation period (yellow and blue LEDs on simultaneously,
then one LED lights green) the blue LED flashes slowly and the speaker is in AP mode.
Launch the UNDOK App. Select the "Set up new audio system" option to continue.
Follow the on-screen instructions to connect the speaker to your Wi-Fi network.
During the connection process you can assign a unique name to the speaker so you can
better identify it on the network.
After setup is finished you can add more existing Wi-Fi speakers to the network, if any.
Spotify Connect
Spotify is a music streaming service that runs on many mobile devices like smartphones or tablet
PCs. Together with one of these devices your speaker SMRS 18 A1 can play this streamed music.
SilverCrest SMRS 18 A1
English - 53