Before Use; Transport And Storage Of Batteries - Hilti SIW 22T-A Manual De Instrucciones

NOTE
The sound pressure and vibration values given in these instructions have been measured in accordance with a
standardized test and may be used to compare one electric tool with another. They may be used for a preliminary
assessment of exposure. The data given represents the main applications of the electric tool. However, if the electric
tool is used for different applications, with different accessories or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period. An accurate estimation of exposure should also take into
account the times when the tool is switched off, or when it is running but not actually being used for a job. This may
significantly reduce exposure over the total working period. Identify additional safety measures to protect the operator
from the effects of noise and/or vibration, for example: maintain the electric tool and accessories, keep the hands
warm, organisation of work patterns.
Total vibration (vector sum of three directions), determined in accordance with EN 60745
Vibration emission value for tightening nuts and bolts of
the maximum permitted size for the ½" socket, a
Vibration emission value for tightening nuts and bolts of
the maximum permitted size for the ¾" socket, a
Uncertainty for tightening nuts and bolts of the max-
imum permitted size, K
Battery B 22/5.2 Li‑Ion
Rated voltage 21.6 V
Capacity 5.2 Ah
Weight 0.78 kg
Energy content 112.32 Wh

5 Before use

5.1 Charging a previously used battery
Ensure that the outer surfaces of the battery are clean
and dry before inserting the battery in the corresponding
charger.
Read the operating instructions for the charger for further
information about the charging procedure.
5.2 Inserting the battery 2
CAUTION
Before fitting the battery, check that the power tool
is switched off and that the safety lock is engaged
(forward/reverse switch in the middle position).
14.5 m/s²
h
14.2 m/s²
h
1.5 m/s²
B 22/2.6 Li‑Ion
B 22/3.3 Li‑Ion
(02)
21.6 V 21.6 V
3.3 Ah 2.6 Ah
0.78 kg 0.48 kg
71.28 Wh 56.16 Wh
CAUTION
Before inserting the battery in the power tool, check
to ensure that the battery terminals and the contacts
in the power tool are free from foreign objects.
1. CAUTION A falling battery may present a risk of
injury to yourself and others.
Check that the battery is securely seated in the tool.
5.3 Removing the battery 3

5.4 Transport and storage of batteries

Pull the battery out of the locked position (working posi-
tion) and move it into the first latching position (transport
position).
Observe national and international transport regulations
when shipping batteries (transportation by road, rail, sea
or air).
B 22/2.6 Li‑Ion
B 22/1.6 Li‑Ion
(01)
21.6 V 21.6 V
2.6 Ah 1.6 Ah
0.78 kg 0.48 kg
56.16 Wh 34.56 Wh
en
15