Intended Use; Li-Ion Battery State Of Charge Display; Items Supplied - Hilti SBT 4-A22 Manual Del Usuario

All manuals and user guides at all-guides.com
▶ Before beginning the work, check the hazard classification of the dust that will be produced. Wear
respiratory protection of a type suitable for the dust you are exposed to and use an industrial vacuum
cleaner with an officially approved protection classification in accordance with locally applicable dust
protection regulations.
▶ Take breaks and exercise your fingers to improve the blood circulation. Exposure to vibration during long
periods of work can lead to disorders of the blood vessels and nervous system in the fingers, hands and
wrists.
▶ Before beginning work, check the working area for concealed electric cables or gas and water pipes.
External metal parts of the power tool can become live, presenting a risk of electric shock, if you
accidentally damage an electric cable.
▶ Switch the power tool off if the accessory tool sticks and stalls. The power tool may be deflected laterally.
▶ Wait until the power tool stops completely before you lay it down.
3 Description
3.1 Product overview
Side handle
@
Keyless chuck
;
Function setting ring
=
Gear selector switch
%
Forward/reverse selector switch with safety
&
lock
Control switch (with electronic speed
(
control)

3.2 Intended use

The product described is a hand-held cordless drill/driver. It is designed for driving and removing screws
and for drilling in steel, wood and plastic.
Use only Hilti Li-ion batteries of the B18 / B22 series with this product.
▶
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.

3.3 Li-ion battery state of charge display

The charge state of the Li-ion battery and malfunctions of the power tool are indicated by the display on
the Li­ion battery. The charge state of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks, the power tool is ready for use.
1 LED blinks, the power tool is not ready for use.
4 LEDs blink, the power tool is not ready for use.
Note
Battery charge state cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the battery display LEDs blink, please observe the instructions
given in the Troubleshooting section.

3.4 Items supplied

Drill / driver, operating instructions.
• Other system products approved for use with this product can be found at your local Hilti Center or
online at: www.hilti.group
Printed: 09.06.2017 | Doc-Nr: PUB / 5356273 / 000 / 00
1
Grip
)
Release buttons with additional function
+
(state of charge display activation)
Rating plate
§
Belt hook (optional)
/
State of charge and fault display (Li-ion
:
battery)
Meaning
• State of charge: 75 % to 100 %
• State of charge: 50 % to 75 %
• State of charge: 25 % to 50 %
• State of charge: 10 % to 25 %
• State of charge: < 10 %
• The battery has overheated or is completely
discharged.
• The power tool is overloaded or has overheated.
English 13