Melita Caffeo SOLO Manual De Instrucciones página 18

Before using for the fi rst time
Display
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
Lights up
Flashes
Lights up
18
The appliance is ready
for operation.
Appliance is heating
up or coffee is being
dispensed.
Change the Melitta
®
PRO AQUA fi lter
cartridge
Filter change in pro-
cess
Fill the water tank
Insert the water tank
Empty drip tray and
coffee grounds con-
tainer
Insert the drip tray
and coffee grounds
container
1 bean: mild
2 beans: normal
3 beans: strong
Fill bean container;
fl ashing stops after
dispensing the next
coffee.
Cleaning the device
Integrated cleaning
programme is running
Descale the appliance
Integrated descaling
programme is running
There is air in the
system.
If necessary, fi ll the
water tank and press
the button for coffee
strength . The ap-
pliance is then vented.
Operating Instructions: Melitta
Before using for the fi rst time
General information
■ Only use pure water without
carbonation.
■ Use the supplied test strip to determine
the hardness of the water used and set
the water hardness ("Water hardness
and fi lter", page 20).
■ If you wish to use a water fi lter, do not
insert it until after the initial startup.
Information for using for the fi rst
time
The appliance must be vented before it is
used for the fi rst time. The appliance may
only be switched on with a completely
fi lled water tank.
■ Place a vessel under outlet 2.
■ Press the
button to switch on the
appliance. illuminates on the display.
■ Press the
button. Water will be
pumped through the system.
■ The appliance is ready for operation
when illuminates on the display 9.
■ After initial startup, insert the Melitta
PRO AQUA fi lter cartridge, if necessary
(see page 20).
Solo
® ®
®
| 1828-0618 | 2018-08