Malfunction
Continuous fl ashing of all
buttons.
Technical data
Operating voltage
Power consumption
Pump pressure
Dimensions
Width
Depth
Height
Capacity
Bean container
Water tank
Weight (empty)
Ambient conditions
Temperature
Relative humidity
Reset the appliance to the default settings
You can reset the appliance to the default
settings.
Prerequisite: The appliance must be
ready for operation.
■ Press the ON/OFF button
press the button for coffee strength
for more than 2 seconds.
→ The appliance has been reset to
default settings.
Operating Instructions: Melitta
Reset the appliance to the default settings
Troubleshooting
Cause
System error
Technical data
220-240 V, 50/60 Hz
maximum 1400 W
maximum 15 bar
200 mm
455 mm
325 mm
125 g
1.2 l
8.0 kg
10°C to 32°C
30% to 80% (non-condensing)
Overview of default settings:
Brewing temperature
Water hardness
and also
Timer for
Auto OFF function
Timer for energy-saving
mode
Solo
| 1828-0618 | 2018-08
®
®
Measure
Switch off the appliance and switch it
on again via the ON/OFF button
; if this does not solve the
problem send the appliance to the
service department.
Default settings
Medium
Very hard
30 minutes
5 minutes
27