Switch description (CMR-F)
1
2
Base Thermostat description (TAR-F)
1
2
3
4
5
Complete Thermostat description (TER-F)
1
2
3
4
6
7
5
Main dimensions of control panel
Accessories
Switch (CMR-F)
1.
Selector 1 in position 0 indicates control off; switching to the sun symbol, heating is activated,
while switching to the snow symbol, cooling is activated.
2.
Selector 2 selects the minimum, medium or maximum fan speed.
In case of using CMR-F switch with units for hot water, it is recommended to use the minimum temperature
thermostat TC-F (optional).
Base Thermostat (TAR-F)
1.
ON / OFF cursor
2.
Season selector; Switching to the sun symbol, heating is activated while the snow symbol activates
cooling. If auto is selected, the control selects the mode of operation automatically depending on
the ambient temperature.
3.
With selector 3, the minimum, medium, or maximum fan speed is selected.
4.
With knob 4, the desired temperatures are defined. The temperature corresponding to position 0
is 20ºC in heating and25ºC in cooling.
5.
The red LED lights up when the control is working with the thermostat.
Complete Thermostat (TER-F)
1.
ON / OFF cursor
2.
Season selector; Switching to the sun symbol, heating is activated while the snow symbol activates
cooling. If auto is selected, the control selects the mode of operation automatically depending on
the ambient temperature.
3.
With selector 3, the minimum, medium, or maximum fan speed is selected. In automatic, the
control automatically selects the suitable speed.
4.
With knob 4, the desired temperatures are defined. The temperature corresponding to position 0
is 20ºC in heating and25ºC in cooling.
5.
The red LED lights up when the control is working with the thermostat.
6.
The Economy key allows the winter and summer set points to be varied. Pressing the key, the
green LED lights up (7) and the ventilation changes to the minimum speed. Simultaneously, the
temperature of position 0 is modified to 17ºC in heating and 28ºC in cooling.
145
83.5
30.75
30.75
141