Function Modes - Cardin Elettronica SL Serie Manual Del Usuario

FUNCTION MODES

During programming and the normal operation of the installation a series of operating indications will appear in real time
on the digital display:
PAUSE
Pause time programming or pause for automatic
TB FI TA TD
reclosing (if activated)
FS CP TC TAL
TB FI TA TD
Automatic programming under way
FS CP TC TAL
AUTO PROG
OPENING
TB FI TA TD
Opening stage
FS CP TC TAL
Automatic
Selected by enabling automatic reclosing (Automatic reclosing 'ON' parameter 5b).
When the gate/door is completely closed the opening command will start a complete cycle which will end with automatic reclosing.
Automatic reclosing starts after the programmed pause period has elapsed (minimum 2 seconds) when the opening cycle has been
completed or straight away after the intervention of a photoelectric cell (the intervention of a photoelectric cell causes the pause time
to be reset). During the pause time 'Pause' will flash on the display along with the remaining pause time.
Pressing the blocking button TB during this period will stop automatic reclosing and consequently stop the display from flashing. The
indicator light remains lit until the closing manoeuvre has terminated.
Semi-automatic
Selected by deactivating automatic reclosing (Automatic reclosing 'OFF' parameter 5b). Work cycle control using separate opening and
closing commands. When the door has reached the completely open position the system will wait until it receives a closing command either
via an external control button or via radio control, before completing the cycle. The indicator light remains lit until the closing manoeuvre
has terminated.
STOP OPENING
TB FI TA TD
Block during opening
FS CP TC TAL
CLOSING
TB FI TA TD
Closing stage
FS CP TC TAL
STOP CLOSING
TB FI TA TD
Block during opening
FS CP TC TAL
78