Loading Caps - Hitachi N 3808AP Instrucciones Y Manual De Seguridad

English

LOADING CAPS

● When loading staples into Stapler,
1) do not pull trigger;
2) do not depress push lever;
3) disconnect air hose from stapler; and
4) keep Stapler pointed downward.
(1) Press the latch of the cap magazine cover with your
fi ngers and open the cap magazine cover.
Cap magazine cover
(2) Pull the caps slightly out of the reel then insert the
reel of caps in the cap magazine.
Cap magazine
Real of caps
(3) Press the cap spring up and guide the cap inside the
cap rail.
Set the second cap on the reverse stopper tab.
16
WARNING
Latch
Cap
Cap spring
Reverse stopper tab
Pull in the opposite direction and verify that the setup
is complete.
(4) Close the cap magazine cover.
Pull the knob in the direction of the arrow to pull back
the cap feeder and feed the lead cap to the fi ring exit.
Knob
Cap rail
exit
Cap rail
Cap rail
Curl part
Lead cap
Cap feeder