Cleaning The Air Filter - Sony VPL-DX10 Manual De Referencia

Ocultar thumbs Ver también para VPL-DX10:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
Cleaning the Air
Filter
The air filter should be cleaned after
approximately 500 hours use. Remove the
air filter cover then remove the dust with a
cloth lightly dampened with mild
detergent solution.
The time needed to clean the air filter will
vary depending on the environment or
how the projector is used.
1
Turn the power off and unplug the ower
cord.
2
Place a protective sheet (cloth) beneath the
projector and turn the projector over.
3
Remove the air filter cover.
4
Remove the filter inside, and then wipe its
dust with mild detergent.
5
Return the filter to the air filter cover.
6
Return the air filter cover.
Notes
• If the dust cannot be removed from the air filter,
replace the air filter with a new one.
• For details on new air filter, consult with
qualified Sony personnel.
• Be sure to attach the air filter cover firmly; it
may cause a problem if the air filter cover is not
installed properly.
12
GB

Cleaning the Air Filter

Bottom

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Vpl-dx11Vpl-dx15

Tabla de contenido