STERWINS 40VBC2-33.1 Instrucciones De Montaje página 322

• Check the trimming spool regularly for damage, and if damaged repair
FR
immediately.
ES
• Switch the product off when the trimming spool is blocked. Remove the battery
pack and remove the blockage. Inspect the spool for damage before using the
PT
product again.
2.11 BRUSH CUTTER SAFETY WARNINGS
IT
• Use this brush cutter only for the purposes it was designed, do not aim the brush
EL
cutter at any people or animals.
• Remove the battery during transportation and during storage.
PL
• Store brush cutters indoors – when not in use, brush cutter should be stored
indoors in dry, locked-up place – out of reach of children.
RU
• Keep all parts of the body away from the cutting blade. Make sure the switch is
off when clearing jammed material. A moment of inattention while operating the
KZ
brush cutter may result in serious personal injury.
UA
• Always inspect the tool before use, and after any impact, check for sign of wear or
damage and repair as necessary,especially the parts of the cutting head.
RO
• Carry the brush cutter by the handle with the cutting blade stopped. Proper
handling of the brush cutter will reduce possible personal injury from the cutting
BR
blade.
• Hold the power tool by insulated gripping surfaces only, because the cutter
EN
blade may contact hidden wiring. Cutter blades contacting a "live" wire may make
exposed metal parts of the power tool "live" and could give the operator an electric
shock.
• Hold the brush cutter properly, with both hands. Loss of control can cause
personal injury.
• Keep hands and feet away from the cutting device at all times and especially
when switching the product on.
• Always be sure of a safe and secure operating position, whilst using the product.
• Never use the product standing on steps or a ladder. Do not work over should
height.
• Always ensure the safety guard supplied is fi tted before using the product.
Never attempt to use an incomplete product or one fi tted with an unauthorised
modifi cation.
322