Connecting To Vehicle Power - Dometic TROPICOOL TCX 14 Instrucciones De Uso

TCX14, TCX21, TCX35
6.5 Select temperature
The status display of the temperature (fig. 3 5, page 3) indicates the selected
temperature range. With an increasing number of illuminating LEDs, the intensity of
the temperature range also increases.
I
NOTE
The following temperature indications are subject to tolerances and are
dependent on the measuring position.
Interior space temperature at approx. 25 °C ambient temperature:
Status display
seven illuminating LEDs
Cooling
an illuminating LED
seven illuminating LEDs
Heating
an illuminating LED
➤ If you want to select the temperature to cool/heat, press the " " button, until
the requested temperature range is reached.
6.6

Connecting to vehicle power

I
NOTE
If you connect the cooling device to the vehicle power, remember that
you may have to turn on the ignition to supply it with power.
6.7 Removing the lid
You can remove the lid of the cooling device (fig. 5, page 4):
➤ Open the lid until it is at a ca. 30° angle to the cooler.
➤ Pull the lid forwards and lift it off diagonally.
EN
Temperature range
approx 0 °C in the interior space
approx 16 °C in the interior space
(ECO mode)
approx 65 °C in the interior space
approx 48 °C in the interior space
Operation
13