Setting The Temperature; Selecting The Temperature Units - Dometic COOLFREEZE CDF16 Instrucciones De Uso

Operation
➤ Place the cooler on a firm foundation.
Make sure that the ventilation slots are not covered and that the heated air can
dissipate.
➤ Press the "ON/OFF" button for three seconds.
✓ The "POWER" LED lights up.
✓ The display switches on and shows the current cooling temperature.
✓ The cooler starts cooling the interior.
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
6.6

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "UP +" and "DOWN –" buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
6.7

Selecting the temperature units

You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
➤ Switch on the cooler.
➤ Press the "SET" button twice
➤ Use the "UP+"and "DOWN-"buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
12
CoolFreeze CDF16
EN