Setting The Temperature; Setting The Mode - Dometic RTX 1000 Manual Del Usuario

RTX1000/2000, SPX1200
7.7

Setting the temperature

I
NOTE
Depending on the set unit for the temperature, the temperature is
changed in steps of either 1 °C or 2 °F.
Control panel
1. Press the button until the
2. Press the or
3. Press the button to save the value.
Remote control
1. Press the + button to increase the temperature.
2. Press the – button to decrease the temperature.
3. To save the value don't press any button for more than 5 s.
7.8

Setting the mode

Control panel
1. Press the button until the
2. Press the or
3. To set the MANUAL mode see below.
4. Press the button to start the selected mode.
If you like to set the fan speed manually (MANUAL mode):
1. Press the button until the
2. Press the or
MANUAL mode is started.
3. Press the button to save the value.
EN
symbol is displayed.
button to set the desired temperature.
symbol is displayed.
button to set the AUTO, ECO or BOOST mode.
symbol is displayed.
button to set the desired fan speed. At the same time the
Using the parking cooler
17