Setting The Temperature; Switching A Compartment Off Or On (Cff70Dz) - Dometic CFF20 Instrucciones De Uso

CFF20, CFF35, CFF45, CFF70DZ
6.6

Setting the temperature

CFF20, CFF35, CFF45
➤ Press the "SET" button (fig. 3 5, page 5) once.
➤ Use the "UP +" (fig. 3 7, page 5) and "DOWN –" (fig. 3 6, page 5) buttons to
select the cooling temperature.
✔ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
CFF70DZ
➤ Press the "SET" button (fig. 3 5, page 5):
– once for the large compartment
– twice for the small compartment
✔ The chosen compartment's display blinks.
➤ Use the "UP +" (fig. 3 7, page 5) and "DOWN –" (fig. 3 6, page 5) buttons to
select the cooling temperature.
Each compartment can be set to work as a refrigerator or a freezer compartment.
✔ The cooling temperature appears in the chosen compartment's display for a few
seconds. The display flashes several times and then the current temperature is
displayed again.
6.7

Switching a compartment off or on (CFF70DZ)

If only one compartment is required, the other compartment can be switched off to
save energy.
Switching off a compartment
If the display of the compartment shows a temperature, you can switch off the
compartment as follows:
➤ Press the "SET" button (fig. 3 5, page 5):
– Once for the large compartment
– Twice for the small compartment
✔ The display of the respective compartment blinks.
➤ Press the "ON/OFF" button (fig. 3 1, page 5).
✔ "OFF" flashes for five seconds on the display of the respective cooling
compartment, then "OFF" is displayed.
EN
Operation
23