Micro Sd Card; Recording - Midland XTC 270 Manual De Instrucciones

Micro SD Card

1. Open and fold down the back rubber cover.
2. Insert Micro SD card into slot observing proper direction (shown sideways).
3. Return rubber flap into place.
NOTE: XTC-270 supports up to 32GB memory card size.

Recording

1. Move the RECORD switch forward. This turns the camera on.
2. The battery and the memory card indicator will turn on showing the status of the camera. The record indicator will begin
flashing red after 4 seconds. This indicates the camera is capturing video. (1 single Beep)
3. To stop recording, move the RECORD switch back to the off position. (3 Beeps indicate "stop recording", 2 Beeps to indicate "correct
video saving")
Note: Don't remove the battery while recording because the file can be damaged
SD card LED Status
Green
Orange
Red
Flashing Red
Flashing Green
Memory Size
1 GB
2 GB
4 GB
8 GB
16 GB
32 GB
Note: The camera will divide the video in files of 10 minutes each (approximately 900Mb)
14
Meaning
1 GB or more avai lable
512 MB to1 GB available
Below 512 MB available or no MicroSD card installed.
Cannot read the card
Indicates card has been reformatted.
HD Record Time
11 minutes
22 minutes
45 minutes
90 minutes
175 minutes
350 minutes
SD Record Time
13 minutes
26 minutes
52 minutes
105 minutes
210 minutes
410 minutes