Spare Parts; Maintenance And Disposal - SKF TWIM 15 Instrucciones De Uso

10. Spare parts

Spare parts
TWIM 15-3

11. Maintenance and disposal

• Store the heater in a dry area, with low
humidity (0-95% non-condensing).
• Store and transport the heater within a
temperature range of 0- 50 °C (32 - 122 °F).
• Keep the heater clean with a soft dry cloth.
Remove all oil drippings that might remain after
use.
• The heater does not require any speciic
maintenance nor regular calibration.
• Do not try to ix the heater yourself.
Approach your SKF contact person or distributor
if there is any malfunctioning or preventive
repair needed.
• The heater is calibrated during production.
If some repairs are performed, the heater needs
to be recalibrated.
• In case of disposal of the heater, take the
necessary measurements to recycle it.
Do not dispose it in a general waste bin.
Description
Magnetic K-type probe 400mm (1.31 ft)
EN 15