Items Supplied; Proper Use - EINHELL TE-TS 315 UD Manual De Instrucciones Original

2.2 Items supplied

Please check that the article is complete as
speci ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or su ocating!
2.2.1 Bench-type circular saw
•
Saw blade guard
•
Push stick
•
Splitter
•
Push block
•
Locking grip for cutting width
•
Rubber foot (4x)
•
Screw for saw blade guard
•
Extractor adapter
•
Locking grip for cutting angle
•
Chassis
•
Stop rail
•
Holder
•
Leg (4x)
•
Cross strut (2x)
•
Longitudinal strut (2x)
•
Hex screw (56x)
•
Face spanner
•
Tool hook
•
Washer (108x)
•
Spring washer (56x)
•
16/19mm ring wrench
•
Nut (56x)
•
Table length extension
•
Handle (2x)
•
Strut for table length extension (2x)
•
Screw for extractor adapter (4x)
•
Cover for extractor adapter
Anl_TE_TS_315_UD_SPK9.indb 30 Anl_TE_TS_315_UD_SPK9.indb 30
GB
•
Angled plate (2x)
•
Collar screw (4x)
•
Washer (large) (4x)
•
Self-locking nut (4x)
•
Original operating instructions
•
Safety information
2.2.2 Items supplied
(Special accessories – slide: for
TE-TS 315 UD (Art. No.: 43.405.58) not
supplied.):
•
Slide plate with scale
•
Stop rail with profile
•
Guide rail system
•
Angle (rear)
•
Angle (front)
•
Clamping lever for angle setting
•
Hexagon screw (large)
•
Washer (large) (2x)
•
Self-locking nut
•
Socket head screw (2x)
•
Locking grip (2x)
•
Hexagon screw (small) (8x)
•
Washer (small) (12x)
•
Spring washer (small) (8x)
•
Nut (small) (4x)
•
Washer (medium)

3. Proper use

The bench-type circular saw is designed for the
slitting and cross-cutting (only with the cross
stop) of all types of timber commensurate with the
machine's size. The equipment is not to be used
for cutting any type of round wood.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
The equipment is to be operated only with suita-
ble saw blades (saw blades made of HM or CV)
It is prohibited to use any type of HSS saw blade
and cutting-o wheel.
- 30 -
24.03.2020 10:10:07 24.03.2020 10:10:07