Remove Packaging - GE 26 Manual Del Propietário

LEVEL THE FREEZER DOOR
14
Locate the height adjuster in the freezer door.
A
Slightly loosen the four Phillips-head screws
from the door on each side (right and left).
Loosen the controller screw with a Phillips-head
B
screwdriver to adjust the level.
Installation Instructions
23
LEVEL THE FREEZER DOOR
14
Find the best position to align the door slope.
C
Example: The slope is about
2 mm as shown below.
Slope
Reference
Rotate the height adjuster to +2.0
Plane
to reduce the door slope.
After adjustment, tighten all the screws.
D
SET THE CONTROLS
15
Set the controls to the recommended setting.

REMOVE PACKAGING

16
A) Remove all tape, foam and protective
packing from shelves and drawers.
(cont.)