Remove Packaging - GE Serie Manual Del Propietario E Instrucciones De Instalación

LEVEL THE FREEZER DOOR
8
Locate the height adjuster cam in the freezer
A
door. Slightly loosen the three door attachment
screws on both sides using a 3/8" hex socket
driver.
B
Locate and loosen the cam screw using the
T-27 screw driver.
Installation Instructions
29
LEVEL THE FREEZER DOOR
9
A Lift the door on the side requiring adjustment,
rotate the cam to required position.
0 - Initial position
1 - Lift by 0.050"
-1 - Lower by 0.050"
-2 - Lower by 0.100
-3 - Lower by 0.150"
After adjustment tighten the 3 attachment
B
screws using to 65 in-lb.

REMOVE PACKAGING

10
A) Remove all tape, foam and protective
packing from shelves and drawers.
(cont.)