Remove Packaging - GE 26 Serie Manual Del Propietário

INSTALLING THE REFRIGERATOR
LEVEL THE FREEZER DOOR
16
Locate the height adjuster in the freezer door.
A
Slightly loosen the four Phillips-head screws
from the door on each side (right and left).
Loosen the controller screw with a Phillips-
B
head screwdriver to adjust the level.
Installation Instructions
34
(cont.)
LEVEL THE FREEZER DOOR
16
Find the best position to align the door slope.
C
Example: The slope is about 2 mm as
shown below.
Slope
Reference
Rotate the height adjuster to +2.0 to reduce
Plane
the door slope.
After adjustment, tighten all the screws.
D
SET THE CONTROLS
17
Set the controls to the recommended setting.

REMOVE PACKAGING

18
A) Remove all tape, foam and protective
packing from shelves and drawers.
(cont.)