Stihl KG 550 Manual De Instrucciones página 23

STIHL offers a comprehensive range of
personal protective clothing and
equipment.
The Power Tool
Never attempt to modify your machine in
any way since this may increase the risk
of personal injury. STIHL excludes all
liability for personal injury and damage
to property caused while using
unauthorized attachments.
Transporting the Power Tool
Refer to the appropriate section in the
instruction manual.
Do not carry the power tool by the
handle on the hopper.
Transporting by vehicle: Properly secure
the machine to prevent it turning over,
slipping and being damage.
Cleaning the Power Tool
Always clean dust and dirt off the power
tool – do not use any grease solvents for
this purpose.
Clean plastic surfaces with a damp
cloth. Do not use aggressive detergents.
They may damage the plastic.
When cleaning the side brooms or roller
brush* (* KG 770 only), wear sturdy
work gloves to reduce the risk of cut
injuries from sharp objects.
Do not use a pressure washer to clean
your power tool. The solid jet of water
may damage parts of the power tool.
Do not spray the power tool with water.
KG 550, KG 770
Do not clean the side brooms or roller
brush* (* KG 770 only) with compressed
air. The powerful jet of air may damage
the bristles.
Storing the Power Tool
When the machine is not in use, store it
so that it does not endanger others.
Secure it against unauthorized use.
Secure power tool to prevent it or the
push handle falling over.
To reduce the risk of injury, do not reach
into the hinge area of the push handle –
if the push handle accidentally falls over,
parts of your body may be pinched
between it and the housing.
Store the machine is a safe and dry
place.
Accessories and Spare Parts
Only use parts and accessories that are
explicitly approved for this power tool by
STIHL or are technically identical. If you
have any questions in this respect,
consult a servicing dealer. Use only high
quality parts and accessories in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of genuine
STIHL replacement parts. They are
specifically designed to match the
product and meet your performance
requirements.
Notes on Operation
Before Starting Work
Do not operate your power tool if any of
its components are damaged.
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the instruction
manual.
Keep the handles dry and clean –
–
free from oil and dirt – for safe
control of the power tool.
Check that the push handle is firmly
–
seated.
Check condition of housing
–
Check condition and security of
–
hopper.
Inspect side brooms and roller
–
brush* (* KG 770 only) for jammed
objects and clogged dirt – the
bristles must move freely.
Check sweeping pressure setting
–
and, if necessary, set it to match the
surface to be cleaned.
Never attempt to modify the controls
–
or the safety devices in any way.
To reduce the risk of accidents, do not
operate your power tool if it is not
properly assembled and in good
condition.
During Operation
If one of the side brooms or the roller
brush* (* KG 770 one) becomes
blocked, stop work and remove the
blockage. Wear sturdy work gloves to
reduce the risk of cut injuries from sharp
objects.
Never reach into rotating bristles – risk of
injury.
Never bump against shelving,
scaffolding, etc. while working since
there is a risk of objects toppling over or
falling from above.
English
21