Introduction & Features - Velleman HAM06WS Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a Velleman product! This wireless home alarm system uses an advanced microprocessor and
SMD technology. Please read the manual thoroughly before bringing this device into service. If the device was
damaged in transit, don't install or use it and contact your dealer.
2. Installation
Follow these steps to install the central unit onto a wall and to do the wiring:
• Open the central unit by unscrewing the 2 screws at the front.
• Fix the back plate of the central unit onto the wall. Remember to first pull all the necessary wiring (cables from
the power supply, sensors siren and telephone line) through the punched hole. Screw the back plate onto the
wall.
• Do all the necessary wiring onto the terminal blocks (see "3. Connection").
• Connect the stand-by battery.
• Screw the front plate onto the back plate and close the unit.
HAM06WS_v2
HAM06WS – WIRELESS HOME ALARM
Referencia Electrónica Embajadores:
3
SG21006
VELLEMAN

Publicidad

Tabla de contenido
loading

Tabla de contenido