Bluetooth Telephone - Pioneer MVH-X370BT Manual De Instrucciones

Menu Item Description
A.PAIRING Select [ON] to pair the unit and iPhone automatically when an
iPhone is connected to the unit via USB. (This function may not
[ON], [OFF]
be available depending on the version of iOS you are using.)

Bluetooth telephone

First, make a Bluetooth connection with the Bluetooth telephone (page 8). Up to two
Bluetooth telephones can be connected simultaneously.
Important
• Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running
can drain the vehicle's battery.
• Be sure to park your vehicle in a safe place and apply the parking brake before operation.
To make a phone call
1
Press to display the phone menu.
When two phones are connected, a phone name appears first then a phone menu
will display. To switch to another phone, press
2
Turn the M.C. dial to select [MISSED], [DIALLED], [RECEIVED] or [PHONE BOOK],
then press to confirm.
The phone number list appears.
3
Turn the M.C. dial to select a name or phone number, then press to confirm.
The phone call starts.
To answer an incoming call
1
Press when a call is received.
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
Purpose Operation
End a call Press
Reject an incoming call Press and hold
Switch between the current caller Press the M.C. dial.
and a caller on hold
again.
.
when a call is received.
Purpose Operation
Cancel a caller on hold Press and hold
Adjust the volume of the caller's Turn the M.C.dial during the call.
voice (When private mode is on,
this function is not available.)
Turn the privacy mode on or off Press BAND/
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (1/
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (1/
then press the M.C. dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold the M.C. dial to activate the voice recognition mode.
2
Press the M.C. dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press BAND/
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Phone menu
Menu Item Description
MISSED Display the missed call history.
DIALLED Display the dialed call history.
RECEIVED Display the received call history.
PHONE BOOK*1 Display the contacts which have been transferred from your
phone. Set [VISIBLE] in the connection menu to [ON] to browse
the contacts via this unit.
.
during the call.
to 6/ ).
to 6/ ),
.
9
En