Pantech U.S. Cellular Verse Manual De Usario página 48

3. Press 2. Restrictions.
4. Enter the four-digit lock code and press the
5. Press the Directional Key
settings:
• Location Setting: Unlock Setting/Lock Setting.
• Calls: Incoming/Outgoing.
For Incoming Calls, set Allow All,
For Outgoing Calls, set Allow All,
• Text Messages: Incoming/Outgoing.
For Incoming Messages, set Allow
For Outgoing Messages, set Allow
• Picture Messages: Incoming/Outgoing.
For Incoming Messages, set Allow
For Outgoing Messages, set Allow
• Data Connection:
Set Allow All or Allow None.
6. Press the Key [SET].
In emergency mode, the settings of
PHONE LOCK SETTING
This setting specifies whether the phone should be locked whenever it is turned on.
Lock Mode prevents the unauthorized use of your phone. Once the phone is locked,
it is in restricted mode until the lock code is entered. You can still make emergency
calls.
1. Slide the phone up, press the
9. Tools & Settings, 4. Phone
2. Enter the four-digit lock code and press the
3. Press 3. Phone Lock Setting.
4. Press the Directional Key
settings, then press the Key [SET].
• Unlocked: Phone is unlocked.
92
Key again.
up or down to select one of the following
Allow Contacts or Allow None.
Allow Contacts or Allow None.
All, Allow Contacts or Allow None.
All, Allow Contacts or Allow None.
All, Allow Contacts or Allow None.
All, Allow Contacts or Allow None.
Incoming Calls does not apply.
Key [MENU], then press
Settings, 4. Security.
Key.
up or down to select one of the following
• On Power Up: Phone will lock when it is turned on.
LOCK PHONE NOW
Lock the phone now.
1. Slide the phone up, press the Key [MENU], then press
9. Tools & Settings, 4. Phone Settings,
2. Enter the four-digit lock code and press the
3. Press 4. Lock Phone Now.
4. To unlock the phone from idle mode, slide the phone up, then press the
Right Soft Key [Unlock] and enter the four-digit lock code and press
the Key.
Unlock code is not needed unless the user sets it.
FACTORY RESET
To delete all User Data and restore all settings to their initial defaults:
1. Slide the phone up, press the Key [MENU], then press
9. Tools & Settings, 4. Phone Settings,
2. Enter the four-digit lock code and press the
3. Press 5. Factory Reset.
4. A confirmation message appears in the display, press the Directional Key
up or down to select Yes, and then press the
5. Enter the four-digit lock code. The phone will turn off and then back on
again automatically.
SYSTEM SELECT
You can set your phone to search or roam on another network when you are not in your
home area. Leave this setting as default unless you want to alter the system selection as
instructed by your service provider.
1. Slide the phone up, press the Key [MENU], then press
4. Phone Settings, 5. System Select.
4. Security.
Key.
4. Security.
Key.
Key.
9. Tools & Settings,
93
01
02
03
04
05
06
07