Information On The Operating Instructions; Intended Use; Ec Conformity; Representation And Layout Of Warning Instructions - HellermannTyton E4500 Manual De Instrucciones

Information on the operating instructions

1 Information on the operating instructions
These operating instructions only apply for the product gas hot air blower E4500 and are intended
for the user. The user must read these operating instructions carefully and understand them before
placing the tool in service.
Within these operating instructions you will find images illustrating best practice guidelines for
operating and maintaining the tool, along with contact details for your local HellermannTyton
country representative.

2 Intended use

The gas hot air blower E4500 is used to shrink heat-shrinkable products of all types, as well as for
soft soldering, forming plastic, and defrosting.
Use of refill cartridges that are not suitable or modifying the gas hot air blower are considered
non-intended use.
We are not liable for any damage and claims arising from the improper operation or use of the
cable tie installation tool, nor are we responsible for any damages caused by defects resulting from
inappropriate or unsuitable use of the tool, incorrect or careless treatment, normal wear and tear
as well as any modifications made to the tool by the customer of a third party.
The warranty/repair by HellermannTyton does not include the rectification of faults that results
from force majeure, external influences, customer neglect (e.g., modifications or attachments,
application errors etc.) or the influence of third parties. The replacement of wear parts or spare
parts during or after maintenance work carried out according to the operating instructions is also
not included.
The gas hot air blower must only be used in faultless condition.

2 .1 EC conformity

The device fulfills the requirements in accordance with:
• Directive 2009/142/EC relating to appliances burning gaseous fuels

3 Representation and layout of warning instructions

The hazard level with the associated warning symbol and explanation are illustrated below:
WARNING
Possible risk of lethal or serious injuries.
NOTE
Texts with this symbol indicate situations that can lead to damage to the tool if not observed.

4 Placing in service

The tool can be used immediately.
f Take the tool out of the packaging and check it for damage. If damaged, inform the supplier in
writing immediately.
4
Operating instructions • E4500 • 05-2016 • 391-90002