Unpacking And Inspection - Beha-Amprobe PRM-5-EUR Manual De Usuario

• Use the product only as specified, or the protection supplied by the
product can be compromised.
• Do not work alone.
• Do not use the tester or test leads if they appear damaged. Examine the
tester and test leads for damaged insulation or exposed metal. Check
test lead continuity. Replace damaged test leads before using the tester.
• Do not touch voltages >30 V AC RMS, 42 V AC peak, or 60 V DC. These
voltages pose electrical shock hazards. Keep fingers behind the finger
guards on the probes and alligator clips.
• To avoid false readings, which could lead to possible electric shock or
personal injury, verify operation beforehand on a known source.
• Do not exceed the Measurement Category (CAT) rating of the lowest
rated individual component of a product, probe, or accessory.
• If the tester is used in a manner not specified in the users manual, the
protection provided by the equipment may be impaired.
• Measurements can be adversely affected by impedances of additional
operating circuits connected in parallel or by transient currents.
• Do not use the PRM-5-EUR with any of the parts removed.
• Do not use the product around explosive gas, vapor, or in damp or wet
environments.
• Disconnect the tester from energized circuits before servicing.
• Have the tester serviced only by qualified service personnel.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 PRM-5-EUR Phase Rotation Tester
1 Non-detachable test leads (black, red, yellow)
3 Test probes (black, red, yellow)
1 Alligator clip (black)
1 Users manual
1 Carrying case
If any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.
4