Symbol; Safety Information; Unpacking And Inspection; Feature - Beha-Amprobe 2100-Alpha Manual Del Usuario

SYMBOLS

Caution! Risk of electric shock.
W
Caution! Refer to the explanation in this manual.
The equipment is protected by double insulation
T
or reinforced insulation.
Equipment for working under live voltage
Canadian Standards Association (NRTL/C)
P
Complies with European Directives.
; Conforms to relevant Australian standards.
Do not dispose this product as unsorted municipal
=
waste. Contact aqualified recycler.
Battery

SAFETY INFORMATION

The Voltage Tester complies with:
EN 61243-3:2010, DIN VDE 0682-401:2011
For Use by Competent Persons
Anyone using this Voltage Tester should be
knowledgeable and trained about the risks involved with
measuring voltage,especially in an industrial setting, the
importance of taking safety precautions and of testing the
Voltage Tester before and after using it to ensure that it is
in good working condition.
W Warning: Read Before Using
To avoid possible electric shock or personal injury:
• The operating instructions contain information and
references required for safe operation and use of the
Voltage Tester. Before using the Voltage Tester, read
the operating instructions carefully and follow them
in all respects.
• Failure to follow the instructions or to comply with
warnings and references may result in life-threatening
injuries to the user and damage to the Voltage Tester.
• If the Voltage Tester is used in a manner not specified
by the manufacturer, protection provided by the
Voltage Tester may be impaired.
• Comply with local and national safety requirements.
• Use proper protective equipment as required by local
or national authorities.
• This product should not be used for voltage more
than 690V.

UNPACKING AND INSPECTION

Your shipping carton should include:
1 2100-Alpha or 2100-Beta voltage tester
2 GS 38 probe tip cap
2 4mm Ø test probe extension (screwable)
2 1.5V alkaline batteries (installed)
1 Users manual
If any of these items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
FEATURES
The BEHA-Amprobe 2100 series are rugged and easy-to-
use two pole voltage testers for voltage and continuity
checks. The 2100 series are for electricians in industrial
and commercial applications for use in the voltage range
12...690 V AC/DC, safety rated to CAT IV 600 V, CAT III 690
V, are built according to latest voltage tester standard EN
61243-3:2010 and are GS approved.
All models offer voltage test by LED, phase rotation test,
switchable load by two push buttons, single pole phase
test and continuity. Moreover, the series offer a torch
function for working in dark environment and have an
ingress protection rating of IP 64.
3